Quantcast
Channel: SCN : All Content - SAP ERP Operations - Quality Management (SAP QM)
Viewing all 2873 articles
Browse latest View live
↧

Problem regarding weight-loss

March 8, 2016, 10:22 am
$
0
0

Hi ,

 

I'm facing a problem regarding 100% weight-loss for a specific batch .

 

I'm stating the procedure : For any market paddy quality testing happens and same is posted in quality result QA32 session . After that , it's done usage decision to allow for production usage in the same . Then , we do 512 movement to deduct moisture and process loss from stock in ZQM403 session .

 

Now , my asking why suddenly this 100% weight-loss was happened ?

 

Attaching , the output and input screen of ZQM403 session .

 

regards

Patel

↧
Search

certificate profiles

March 15, 2016, 7:00 pm
$
0
0

Hi,

     I have a sellable packaged chemical which has an 04 inspection lot and then we store it in the warehouse for maybe a few months. Then sales order drops in and we do a 10 inspection lot for the sellable packaged product. I want to have a cert profile which can draw the results from the 10 and the 04 MICs. However the profile header gives me the ability to only hold the one inspection type and origin. How do I assign both the 10 and the 04 to the profile header ?

 

Thanks

↧
↧

QM Tolerance key

March 15, 2016, 9:45 pm
$
0
0

Dear Gurus,

 

We have set tolerance key +50ml and set inside one of the mic of the parameter, at qs23, success.

But when we put in inside the task list at IA06, we have face error "Control indicator and tolerance key are not compatible".

Below are the setting:

 

Tolerance key = +50ml

Target value = 1000.0

Lower spec limit = 1000.0

Upper limit = 1050.0

 

Awaiting for you kind reply. Thanks!

 

Regards,

Nur

↧

Inspection lot copy

March 16, 2016, 3:38 am
$
0
0

Dear All,

 

We are using following BAPI BAPI_INSPOPER_RECORDRESULTS to transfer the inspection result to another lot through an enhancement during result recording for inspection type 10

 

RR value will be copied to other lot for same delivery number

 

But RR value is not copied to other lot when there is a batch split in the same delivery

 

IS there is any other BAPI available to handle for batch split in the delivery?

 

Hope my question is clear

 

Abu

↧

Usage Decision Change After Long term inspection

March 16, 2016, 4:31 am
$
0
0

Hi,

I want to change UD after long term inspection result recording.

But it will give status check error - LTIN.

Please guide in this.

 

Regards,

KA

↧
↧

Q Info Record creation

March 16, 2016, 8:30 am
$
0
0

Hi Experts,

 

When the record is getting created using FM QB_VB_QINF_POST, in Tcode QI02: i am getting a popup.as below. the popup shows the same meterial, vendor and plant information. If we select first one, no data created. data created for second one . I think there is a problem in creating record in FM.

 

followed the below link.

https://scn.sap.com/thread/1757441

 

I didn't do (Pass the info record number to QINF_OLD_IMP only,) .

 

Please suggest how to supress from this popup.

 

duplicate.PNG

 

Best regards,

Narasimha.

↧

PLMD_AUDIT - Checkbox of "Unplanned Audits" checked and greyed out

March 7, 2016, 2:13 am
$
0
0

Hello,

 

I have an issue in the SAP Audit Management. Most of the audits created in it via the transaction PLMD_AUDIT have the checkbox "Unplanned Audits" checked and greyed out.

 

Unfortunately these are not really unplanned audits and therefore we want to remove this mark.

 

Deepanshu Saxena already asked at http://scn.sap.com/thread/3561345 ("SAP Audit Management - Unplanned Audit checkbox greyed out") basically the same question. Unfortunately his question is still marked as "Not Answered". Does anybody have any clue how to resolve this issue?

 

If you need any further information don't hesitate to ask!

 

Kind regards,

Michael

↧

feasibility to do adobe form for transaction qa32

March 13, 2016, 10:44 pm
$
0
0

can we able to create custom adobe form for transaction qa32, if so kindly give me guidance of were to assign the output type.

↧
Search

Can not remove Inspection lot

February 16, 2016, 6:30 pm
$
0
0

Dear all,

Please help me to solve this issue.

There is a material document has been cancelled but inspection lot with status REL SKIP SPRQ QLCH still exist. Normally, the inspection lot will be disappear automatically after some days in this case. But now it does not work. Actually, i don't know how to config.

 

2-17-2016 9-12-41 AM.png

And inspection lot on MD04 is not disappear.

 

2-17-2016 9-17-56 AM.png

 

Please help,

 

Thanks & Best Regards,

Quang

↧
↧

Add MIC to inspection lot

January 22, 2013, 10:22 am
$
0
0

Hi All,

 

we have one inspection lot generated against purchase order GR.

Now we want to add additional MIC while doing result recording.

 

how this can be achieved ? and what are the prerequisites for this ?

 

please explain in details....

↧

Locking a Production Order Until Quality Releases

March 16, 2016, 12:10 pm
$
0
0

I have an issue where I need to send samples to my customer.  Is there a hold that I can put on the production order, so the parts cannot be used, until my samples have been processed and sent to the customer?

↧

Document reversal for material having serial number activation

March 16, 2016, 11:39 pm
$
0
0

Dear Gurus,

 

I am facing issue –

 

I have one material for which serial number as well QM is activated. I have made GR against Production Order.

 

It is also cleared from quality. Now I want to change the serial number for same material.

 

It can be possible to achieve it after reversing the document and again need to post with required serial no.,

 

But once you done UD, Inspection lot cannot be reversed. As per my knowledge, there is flaw in SAP that it’s not possible

to cancel the inspection lot for material which has serial no. assigned.

 

Request you to suggest possible way out..?

 

Thanks in advance..!!

 

Best Regards,

↧

0130 - Inspection lot not created at 101 (Subcont. PO)

March 18, 2016, 2:12 am
$
0
0

Hi,

 

I have the following issue.

 

Master DATA:

 

Semifinished material with Inspection Type 0130 at material master QM view.

Semifinished material with usage 53 inspection plan.

 

I create a subcontracted PO (ítem category L) for the semifinished material and when I do the GR via MIGO, the system doesn't create any inspection lot for the semifinished material.

 

Thanks in advance.

↧
↧

Subcontracting quality inspection

January 31, 2014, 8:13 pm
$
0
0

Dear All

I have subcontracting by- product scenario, For ex my main material is A and by product material B

when i am doing the pre Good receipt 103 mov type only main material is come in block stock after that when i am doing the quality inspection system gives the error

 

Of the required quantity of material B, 10 KG remain(s) open

Message no. M7389

 

kindly guides me, how to map the scenario

↧

Cancelled Inspection lot Status Reversal

March 3, 2016, 10:28 pm
$
0
0

Dear All,

 

The in-process inspection lot where the usage decision is accepted and lot has been cancelled unfortunately . Due to this the Production order closing cannot be completed .

 

please do provide the solution how to reverse the usage Decision and Status Reset for the same inspection lot .

 

The Error Displaye "inspection Lot "XXXX"for order "XXXX" does not have required status.

 

Please do provide solution for closing the production order.

 

Thanks and Regards.

Vishnu Ravi.

↧
Search

Automatic usage decision is marked in the material master & not completed successfully after batch job run for few materials.

March 21, 2016, 12:26 am
$
0
0

Hello All,


Automatic usage decision is marked in the material master & for this batch job is created & And also an inspection plan is available.

After the results recording the UD should be taken automatically by the system as indicated in the materials.


But this is not happened although all necessary conditions are met:-

 

  • All characteristics have been completed
  • None of the characteristics have been rejected
  • No defects have been recorded, or quality notifications created
  • The waiting time set in Customizing must have elapsed.
  • Batch completed successfully.

 

 

Please Assist...Thanks Shailen

↧

Removing Quality Block in MIRO

March 20, 2016, 8:59 pm
$
0
0

Hi Everyone

 

We created a material document with movement type 101 and inspection lot is created . In first inspection lot item is rejected, so the item is return to the vendor with movement type 122. Again item is received and did subsequent delivery with movement type 101, so the inspection lot is created .This time item is approved.

 

So we created a MIRO invoice there payment is blocked because of Quality block. In material master QM control key is maintained with Z*** - Block Invoice.

 

Kindly let me know how to remove the block and also why there is a block even after accepting the item . If i use normal goods receipt second time, this error is not coming. This error occurs only when we use subsequent delivery

 

Regards

Raghu Prasad N

↧
↧

How to assign serial number for one material when create inspection lot manually?

March 21, 2016, 6:31 pm
$
0
0

Hi,Gurus,

 

I want to create one inspection lot for one material with serial number when create inspection lot manually? My question is I cant add the serial number ,can anyone tell me ?Many thanks!

未命名图片1.png

未命名图片2.png

 

Many thanks!

BR

Mishuang Zhao

↧

Inspection Point Deletion

March 21, 2016, 7:21 pm
$
0
0

Dear Gurus,

 

May I know is there any way to delete the inspection point created? As I search, there is not possible. I wonder if there are any user exit can apply to able this function?

 

As currently got case user is wrongly created inspection point and want to delete it from the screen.

 

Awaiting for your reply.

Thanks.

 

Regards,

Nur.

↧

Inspection

March 22, 2016, 3:15 am
$
0
0

I am working on a scenario related to In coming inspection.I have created sampling scheme/Sampling procedure assigned the sampling scheme into the sampling procedure.

I need to do Tightened/Normal inspection based on the rejection & acceptance qty of the goods receipt.

 

1.Should i activate DMR for this scenario

 

2.How will the system know when to do the normal & when to do Tightened inspection or the user has to do anything manually to do Tightened/Normal inspection

↧
Viewing all 2873 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>