I am trying to mass change the "Recording Type" control indicator and I can't seem to get it to work. I highlight all, indent that column and go to mass change and it gives me selection option in which I cannot find Recording Type listed.
I was able to change Inspection Scope no problem so not sure what the issue is?
Dear gurus,
i have the following scenary:
Material A no QM view .
Create a production order for the following material and confirm partial quantity as GR.
Now i would like to active QM management for this material with stock and production order released.
What kind of activity i must do in order to don't create inconsistency problems?
Thansk a lot
Daniele
Hi,
I have a following requirement.
We are using GOS to store documents under Quality Notifications. At the moment when we click on GOS link we get a pop window showing all the header and line items based on the tasks configured. After selecting any line item or header data we are moved to Create attachment pop within GOS link.
Pop-up 1:
Pop-up 2:
Requirement here is to bypass the 1st pop-up window containing header / line item details and directly jump to Create attachment pop within GOS.
Regards,
Deepak Kori
Hi All,
I am searching for BAPI/ FM for adding an Unplanned Characteristic in tcode QE01, While I debug the entire Tcode several times i got an FM "QEEB_UNPLANNED_CHARACTERISTIC" still after executing that it is not added may be something else needs to be call.
Help will be appreciated...
Thanks & regards
Sumit
Dear All,
By mistake we have cancel the lot and status is LTCA.
We have also reverse the UD. So stock is in QI.
Can we reset the lot and stock to Unrestricted.
Thanks and Regards,
Nirav
Dear All,
We have come across this requirement from our client to assign the inspection lots created in the system to the individual lab technicians to complete the task of quality check. Is it possible in standard SAP?
I have thought of a way to design individual technician as work center & create multiple inspection plans for every work center but this will be cumbersome as everytime the user has to select the inspection plan manually for the inspection lot.
Is there any simplest way to map the requirement?
Regards
Manoj P
Hi All,
In my project, business require whenever UD will be done for inspection lot (it may be partially accepted or fully accepted) what ever the stock quantity moving to unrestricted stock from quality hold stock should be convey to the production manager thru mail. Means mail should be trigger to the production manager that for ex. 100 kg, material code-20001, Receiving SLOC-SLOC1 has been cleared from quality hold.
How to deal with this?
Thanks in advance!!!!
Regards,
Siva Sankar
Hello,
Can anyone please guide me how can I mass delete Q Levels in QM...
Dear all,
Can anyone help with a way to prevent the stock posting to QI stock during GRN, During the following situation.
1. Material deactivated for Inspection type 01.
2. GR for material for the PO which was created earlier date than the deactivation date( it post the material to QI without Inspection lot).
3. To avoid the GR posting to QI, I was trying to post the stock to UNRES by selecting the field Post to unrestricted stock during GR.
But this does not work and stock posted to QI.
How can we control THE STOCK TO POST TO UNRES stock during the GRN itself.
Whether the selection option will not work.
Hi,
Is there any standard report or T-code from where I can download Class and Characteristics from SAP. Basically I need to do the data validation between the data provided by business and the ones uploaded into SAP for 100% error free.
Regard's,
Kiran.
We can create the outgoing COA using TCodes QC21 and QC22, but when we try to use QC20 (which is the preferred method) we get an error that that says "batch not found in Plant XXX" which is the plant we deliver from. Indeed, the batch does not exist in the delivering plant, but instead existsin the Production Plant. Can anyone figure out a way to do this?
Problem:
HU status is unrestricted use (checked in HUMO) but batch appears in Quality Inspection (checked in MB52)
History:
One batch with 120 pieces was produced and every 40 pieces have its own HU.
SAP saved 3 different HUs with one batch. Two of them were shipped but one HU remains into the stock.
Actions:
Normal quality approval process is impossible because of HU has not quality status.
VLMOVE reported error "Deficit of BA Unrestricted-use 40 PC" with movement type 322
MIGO reported error "Change the inspection stock of material XXX in QM only"
MSC2N was tried but without success.
Question:
How to change batch status to Unrestricted?
Hi All,
I have an scenario for an inspection lot with inspection points. For an specific characteristic, the mean value from QAMR table is 4.075% and the limit of the characteristic on the inspection plan for the inspection lot is 5%. The problem lies that SAP has valuated that characteristic as rejected in field QAMR-MBEWERTG even though the value is below the specification limit. Please find attached a picture from QA11 transaction showing the scenario and another picture of the control indicators for the characteristic.
All the inspection points have been properly closed.
It is working properly in other inspection lots with the same inspection plan.
Please let me know if you have any idea why would this happen.
Hi ,
One generic query..
On help.sap website its mentioned that "In the QM-IDI interface, the data records to be transferred are distinguished by a three-character record type. The individual transfer structures and corresponding record types are listed below. Note that record types are always transferred in capital letters" .
I am aware that structures will be used in program to capture the data at run time and then pass/use corresponding data values. We view structure through SE11.
Now my query is that how can i display the record type ? And where is it used ?
Thanks and Regards
Ravi Bhushan
Hi,
I am trying to change the quality notification type (in transaction - QM02) from one notification type to another notification type. As per system configuration settings, the notification types are maintained as allowed for changing the notification type.
However, the option of changing the quality notification type is not available on the screen of QM02.
Can anyone guide on this issue?
Is there any config missing?
Regards,
Prashant
Hi Guru's,
We are having some materials in which Shelf life is maintained without batch management,during one of the GR we maintained Date of Production in MIGO and save the trxn. so inspection lot is created,while doing the stock posting during UD i am getting "Enter the date of production" Message no. 12018.
Kindly let me know how to resolve this.
With Regards.
Hello,
In my quality plan i want to define one operation (for one work center) with different insp. chars.. Thees insp chars need different samples with different quantities in different sample containers to be analysed.
Quantities and containers are defined in the sample drawing item, what means i need more than one sample drawing item in my operation. The sample drawing item is set per insp. char. buw if i have more than one sample drawing item in one operation no samples will be created and i reveice an error message.
can somebody help?
Martin
Hi Everybody
Anyone can you help with a specific problem about audit management.
I'm installing this module but I need to do an interface beetween Audit management and MS project in order to define a audit plan.
Regards
Luis
Dear all,
I am trying to activate ECM for inpection plan. I want to make change number field mandatory in QP01/QP02 transaction. Eventhough I have set up change number as required field in OP5B, I am able skip change number in qp01/qp02.
Am I missing something? please help.
Hi
I have a notification that I can't save - every time the notification dumps.
I think the reason is that there is an order assigend to the notification, becuase I can see that there is a status ORAS in the notification.
My question is, where/how do I find the order, so I can complete that order and remove the ORAS status.
Few details of the dump:
Category ABAP Programming Error
Runtime Errors RAISE_EXCEPTION
ABAP Program SAPLIQS1
Application Component PM-WOC-MN
Thanks
/Lars